Rgb besturing voor mijn appartement

Written by Walter

< >

Dit ga ik wss bouwen voor de rgb led besturing van mijn kasten: powerRGB is the extension of tinyRGB to drive high power LED’s. For this project I used a 3 x 1W common Anode RGB LED. Q1 to Q3 are N-Channel HEXFet Mosfet’s with logic level drive and a RDSon at about 50mOhms. R1 to R3 are at about 2k2, R4 to R6 at about 15k and R7 to R9 depend on the LED used and VCC. If you use FET’s with higher RDSon you have to consider RDS in your calculation! Rx = (Vcc-Vf)/Im - RDSon [Vcc: Volatge of power supply, Vf: Vorward Voltage of the Diode, Im: Max current of LED] De mosfets die men gebruikt zijn deze mosfet voor rgb high powered The software for the AVR is the same as for tinyRGB. Er is ook een kant en klare oplossing van conrad hier : STEUERGERÄT RGB CHROMOFLEX 3 X 2,5 A (Conrad Electronic) Vraag is alleen of ik deze naar wensen kan besturen met mijn eigen software (zou me wel een avondje solderen besparen dus is wss een goei optie dit).

Back to archive